icd 10 cm code for right distal femur fracture

by Levi Waters 5 min read

Unspecified fracture of lower end of right femur, initial encounter for closed fracture. S72. 401A is a billable/specific ICD-10-CM code that can be used to indicate a diagnosis for reimbursement purposes.

How long does it take to recover from a broken femur?

The majority of people who suffer a femur fracture receive specialized treatment in a long-term nursing or rehabilitation facility. Full recovery from a femur fracture can take anywhere from 12 weeks to 12 months; however, most people begin walking with the help of a physical therapist in the first day or two after injury and/or surgery.

Do you code fracture aftercare ICD10?

You would code the aftercare codes for follow up visits while the fracture is healing after the initial treatment. The guidelines state: "Fractures are coded using the aftercare codes for encounters after the patient has completed active treatment of the fracture and is receiving routine care for the fracture during the healing or recovery phase.

What are the symptoms of a femur fracture?

  • Confusion or loss of consciousness for even a brief moment
  • Heavy or uncontrollable bleeding
  • Inability to move the leg
  • Low blood pressure ( hypotension)
  • Protruding fragments of bone through the skin
  • Severe pain

What are the complications of a femur fracture?

  • Infection
  • Injury to nerves and blood vessels
  • Blood clots
  • Fat embolism (bone marrow enters the blood stream and can travel to the lungs; this can also happen from the fracture itself without surgery)
  • Malalignment or the inability to correctly position the broken bone fragments

More items...

image

What is the ICD-10 code for femur fracture?

Fracture of femur ICD-10-CM S72. 309A is grouped within Diagnostic Related Group(s) (MS-DRG v39.0):

What is right distal femur fracture?

What is a Distal Femur Fracture? A distal femur fracture is a break of the thigh bone just above the knee. It can result in cracks that extend into the knee joint itself. They can also happen around total joint replacements.

What is the ICD-10 diagnosis code for right hip fracture?

ICD-10-CM S72. 001A is grouped within Diagnostic Related Group(s) (MS-DRG v39.0): 521 Hip replacement with principal diagnosis of hip fracture with mcc. 522 Hip replacement with principal diagnosis of hip fracture without mcc.

What is the ICD-10 code for distal radius fracture?

ICD-10 code S52. 501A for Unspecified fracture of the lower end of right radius, initial encounter for closed fracture is a medical classification as listed by WHO under the range - Injury, poisoning and certain other consequences of external causes .

What is distal femoral?

The distal femur is the bottom part of your thigh bone. It is a trapezoidal shaped bone that makes up the top of your joint and sits just behind your knee cap. Your knee is the largest weight-bearing joint in the body.

What bone is distal to the femur?

patellaThe head of the femur articulates with the acetabulum in the pelvic bone forming the hip joint, while the distal part of the femur articulates with the tibia (shinbone) and patella (kneecap), forming the knee joint....FemurFMA9611Anatomical terms of bone11 more rows

What is the ICD-10 code for right proximal femur fracture?

Unspecified fracture of right femur, initial encounter for closed fracture. S72. 91XA is a billable/specific ICD-10-CM code that can be used to indicate a diagnosis for reimbursement purposes. The 2022 edition of ICD-10-CM S72.

What is fracture of femur?

A broken thighbone, also known as a femur fracture, is a serious and painful injury. The femur is one of the strongest bones in the body, and a break or fracture in the femur bone is often caused by severe injury such as trauma sustained in a motor vehicle accident.

What is the ICD 9 code for hip fracture?

ICD-9-CM and ICD-10-CM CodesOsteoporosis ICD-9-CM & ICD-10-CM CodesDisuse osteoporosis: 733.03M81.8Other osteoporosis: 733.09M81.8FRAGILITY FRACTURESHip fracture: 820.0, 820.2, 733.14S72.019A, S72.023A, S72.033A, S72.043A, S72.099A, S72.109A, S72.143A, S72.23XA, M84.459A12 more rows

How do you code a fracture in ICD-10?

In ICD-10-CM a fracture not indicated as displaced or nondisplaced should be coded to displaced, and a fracture not designated as open or closed should be coded to closed. While the classification defaults to displaced for fractures, it is very important that complete documentation is encouraged.

What is ICD-10-CM code S52 501A?

501A Unspecified fracture of the lower end of right radius, initial encounter for closed fracture.

Where is the distal end of the radius?

What is a distal radius fracture? The distal radius is the end (distal) portion of the forearm bone (radius). It connects to the carpal bones at the wrist and runs parallel to the ulna, which is the other bone of the forearm. The radius transmits up to 80% of the forces across the wrist to the forearm.

What is the ICD code for fracture of femur?

Use a child code to capture more detail. ICD Code S72 is a non-billable code. To code a diagnosis of this type, you must use one of the seven child codes of S72 that describes the diagnosis 'fracture of femur' in more detail.

What is a femoral fracture?

A femoral fracture is a bone fracture that involves the femur.

What is the code for fracture of lower leg and ankle?

Fracture of lower leg and ankle - instead, use code S82.-

What is the ICD code for fracture of right femur?

ICD Code S72.91 is a non-billable code. To code a diagnosis of this type, you must use specify a 7th character that describes the diagnosis 'unspecified fracture of right femur' in more detail. The 7th characters that can be added, and the resulting billable codes, are as follows:

What is a femoral fracture?

A femoral fracture is a bone fracture that involves the femur.

What is the ICd 9 code for a fracture of the distal femur?

So a physeal fracture of the distal femur would be reported as 821.22 for a closed fracture or 821.32 for an open fracture. It should be noted that these codes are not specific to Salter-Harris fractures. These codes are used for any fracture or separation of the epiphysis in the lower end of the femur. These codes are reported both for adults (who have closed growth plates) and children and adolescents (who have open growth plates) even though the potential for complications, including arrested bone growth, is much greater for children and adolescents.

What is a growth plate fracture?

Physeal fractures, also referred to as growth plate fractures, are fractures that occur in the distal or proximal physis of the long bones, and they are of particular concern when they occur in children and adolescents who have not finished growing. Until full growth is attained, the growth plates are open and filled with cartilaginous tissue.

What happens when a physeal fracture occurs?

When a physeal fracture occurs, the cartilaginous tissue of the growth plate becomes disrupted or separated, and when this occurs, bone growth may be affected. In the United States, physeal fractures are classified by severity using a system developed in 1963 by Robert Salter and W. Robert Harris; the system is known as ...

What type of injury involves only the growth plate without a fracture of either the diaphysis or epiphy?

Type V: This is a crush- or compression-type injury that involves only the growth plate without a fracture of either the diaphysis or epiphysis.

What is type 1 fracture?

Type I: Fracture of the bone through the growth plate with separation of the epiphysis from the diaphysis.

What is S79.111?

S79.111- Salter-Harris Type I physeal fracture of lower end of right femur

image