icd 10 code for dexa done mineral density study screening

by Laurie Shields 8 min read

Bone density dexa scan

Dual-energy X-ray absorptiometry

Dual-energy X-ray absorptiometry is a means of measuring bone mineral density. Two X-ray beams, with different energy levels, are aimed at the patient's bones. When soft tissue absorption is subtracted out, the bone mineral density can be determined from the absorption of each beam by bone. Dual-energy X-ray absorptiometry is the most widely used and most thoroughly studied bone density me…

/test CPT code 77080 & 77081 Bone density scan is performed to check the density of bones. We use to do bone density scan to check osteopenia (733.90, ICD10-M85.80) or osteoporosis (733.00, ICD10-M81.0) presence in bones. The amount of calcium correlates with bony content and with bone strength.

Encounter for screening for osteoporosis
Z13. 820 is a billable/specific ICD-10-CM code that can be used to indicate a diagnosis for reimbursement purposes. The 2022 edition of ICD-10-CM Z13. 820 became effective on October 1, 2021.

Full Answer

What is the ICD 10 code for bone density studies?

Bone (Mineral) Density Studies (NCD 150.3): ICD-10 Diagnosis Code List PURPOSE The Medicare Advantage Policy Guideline documents are generally used to support UnitedHealthcare Medicare Advantage claims processing activities and facilitate providers’ submission of accurate claims for the specified services.

What is a bone (mineral) density test?

42 CFR 410.32, Diagnostic x-ray tests, diagnostic laboratory tests, and other diagnostic tests: Conditions Bone (mineral) density studies are used to evaluate diseases of bone and/or the responses of bone diseases to treatment.

What is DXA bone density testing?

When testing can’t be done on the spine, hips and pelvis, NOF suggests a central DXA test of the radius bone in the forearm. DXA can also be used to measure peripheral sites, such as the wrist and finger. DXA is non- invasive and provides precise measurements of bone density with minimal radiation.

Does this LCD supersede existing Medicare regulations for bone mineral density studies?

This LCD supplements but does not replace, modify or supersede existing Medicare applicable National Coverage Determinations (NCDs) or payment policy rules and regulations for Bone Mineral Density Studies. Federal statute and subsequent Medicare regulations regarding provision and payment for medical services are lengthy.

What ICD-10 codes cover DEXA scan?

ICD-10 CM code Z79. 83 should be reported for DXA testing while taking medicines for osteoporosis/osteopenia. ICD-10 CM code Z09 should be reported for an individual who has COMPLETED drug therapy for osteoporosis and is being monitored for response to therapy.

What ICD-10 will Medicare cover for DEXA scan?

Many ICD-10 codes cover fractures, but there are other ICD-10 codes Medicare will cover when used with a DXA Bone Scan (77080): 0 // Asymptomatic menopausal state. 3 // Long term (current) use of hormonal contraceptives.

What diagnosis covers a DEXA scan?

A DEXA scan is an imaging test that measures bone density (strength). DEXA scan results can provide helpful details about your risk for osteoporosis (bone loss) and fractures (bone breaks). This test can also measure your body composition, such as body fat and muscle mass.

What is the ICD-10 code for bone density?

ICD-10 Code for Disorder of bone density and structure, unspecified- M85. 9- Codify by AAPC.

What ICD 10 code covers bone density for Medicare?

(L34639) Bone Mass Measurement ICD-10 Codes That Support Medical Necessity and Covered by Medicare Program: Group 1 Paragraph: Note: ICD-10 codes must be coded to the highest level of specificity.

How do you code a bone density test?

CPT 77080 is used to code for bone density scan of axial bone like hip, pelvis and spine while 77081 was used to code axial bone like wrist, radius, heel etc. While coding 77085 and 77081 together do remember to use modifier XU with cpt code 77081.

What is the ICD 10 code for osteoporosis screening?

Z13. 820 Encounter for screening for osteoporosis - ICD-10-CM Diagnosis Codes.

What is the CPT code for a DEXA bone density scan?

Group 1CodeDescription77080DUAL-ENERGY X-RAY ABSORPTIOMETRY (DXA), BONE DENSITY STUDY, 1 OR MORE SITES; AXIAL SKELETON (EG, HIPS, PELVIS, SPINE)77085DUAL-ENERGY X-RAY ABSORPTIOMETRY (DXA), BONE DENSITY STUDY, 1 OR MORE SITES; AXIAL SKELETON (EG, HIPS, PELVIS, SPINE), INCLUDING VERTEBRAL FRACTURE ASSESSMENT1 more row

What is the difference between a DEXA scan and a bone density test?

A bone density test, also referred to as a DEXA scan, is a noninvasive test that measures calcium and other minerals in your bones. It measures the strength and thickness, or mass, of your bones. As we age, bones naturally become thinner. Osteopenia occurs when bones are thinner than normal.

Is a DEXA scan a bone scan?

A bone density scan uses low dose X-rays to see how dense (or strong) your bones are. You may also hear it called a DEXA scan. Bone density scans are often used to diagnose or assess your risk of osteoporosis, a health condition that weakens bones and makes them more likely to break.

Does Medicare pay for screening DEXA scan?

In most cases, Medicare insurance does cover DEXA scans under Part B. Medicare Part B (Medical Insurance) provides benefits for outpatient procedures that are deemed medically necessary for ongoing treatment of illness.

How often does Medicare cover dexa?

Medicare will cover DEXA bone mass measurement once every 2 years on a person who falls into 1 out of the 5 Following categories: 1. A woman who has been determined by her physician to be estrogen-deficient and at clinical risk for osteoporosis. 2.

What is DXA used for?

DXA can also be used to measure peripheral sites, such as the wrist and finger. DXA generates 2 x-ray beams of different energy levels to scan the region of interest and measure the difference in attenuation as the low- and high-energy beams pass through the bone and soft tissue.

How to measure BMD?

DXA is probably the most commonly used technique to measure BMD because of its ease of use, low radiation exposure, and its ability to measure BMD at both the hip and spine. DXA can also be used to measure peripheral sites, such as the wrist and finger. DXA generates 2 x-ray beams of different energy levels to scan the region of interest and measure the difference in attenuation as the low- and high-energy beams pass through the bone and soft tissue. The low energy beam is preferentially attenuated by bone, while the high energy beam is attenuated by both bone and soft tissue. This differential attenuation between the 2 beams allows for correction for the irregular masses of soft tissue, which surround the spine and hip, and therefore the measurement of bone density at those sites.

What is a FRAX assessment?

a. A FRAX Assessment is done to identify patients for BMD testing when any of the following criteria are met:

Why do you need to measure BMD?

An initial measurement of BMD at the hip or spine may be considered medically necessary to assess fracture risk and the need for pharmacologic therapy in both women and men who are considered at risk for osteoporosis. BMD testing may be indicated under the following conditions:

What is the ICd 9 code for osteopenia?

ICD-9-CM code 733.90 should be reported to indicate osteopenia, (only when billing 77080-DXA), when used to follow treatment with FDA approved osteoporosis medications.

What is a 77078/26 claim?

Claims for the professional component only (77078/26, 77080/26, 77081/26, and G0130/26) should indicate one of the following payable places of service for reimbursement : office (11), mobile (15), inpatient hospital (21), outpatient hospital (22), and independent clinic (49).