icd-9-cm code for aftercare for acl repair

Full Answer

What is the ICD 10 code for surgical aftercare?

Z48.81 ICD-10-CM Diagnosis Code Z48.81. Encounter for surgical aftercare following surgery on specified body systems 2016 2017 2018 2019 Non-Billable/Non-Specific Code. Applicable To These codes identify the body system requiring aftercare.

What is the ICD 9 code for medical coding?

ICD-9-CM V58.49 is a billable medical code that can be used to indicate a diagnosis on a reimbursement claim, however, V58.49 should only be used for claims with a date of service on or before September 30, 2015. For claims with a date of service on or after October 1, 2015, use an equivalent ICD-10-CM code (or codes).

What is the ICD 10 code for aftercare for digestive problems?

2018/2019 ICD-10-CM Diagnosis Code Z48.815. Encounter for surgical aftercare following surgery on the digestive system. 2016 2017 2018 2019 Billable/Specific Code POA Exempt. Z48.815 is a billable/specific ICD-10-CM code that can be used to indicate a diagnosis for reimbursement purposes.

What is the ICD 10 code for aftcr?

Z48.815 is a billable/specific ICD-10-CM code that can be used to indicate a diagnosis for reimbursement purposes. Short description: Encntr for surgical aftcr following surgery on the dgstv sys The 2021 edition of ICD-10-CM Z48.815 became effective on October 1, 2020.

What is the ICD-10 code for status post ACL reconstruction?

ICD-10: Z96. 651, Status (post), organ replacement, by artificial or mechanical device or prosthesis of, joint, knee-see presence of knee joint implant.

What is the ICD-10 code for aftercare following surgery?

81 for Encounter for surgical aftercare following surgery on specified body systems is a medical classification as listed by WHO under the range - Factors influencing health status and contact with health services .

What is the ICD-10 code for orthopedic aftercare?

Z47.89ICD-10-CM Code for Encounter for other orthopedic aftercare Z47. 89.

What is code Z98 89?

ICD-10 Code for Other specified postprocedural states- Z98. 89- Codify by AAPC. Factors influencing health status and contact with health services. Persons with potential health hazards related to family and personal history and certain conditions influencing health status.

How do you code surgical aftercare?

Code Z47. 1 (aftercare following joint replacement surgery) is used during the follow-up phase of any joint replacement surgery, even if the replacement was for treatment of a fracture.

What is the difference between follow-up and aftercare?

Follow-up. The difference between aftercare and follow-up is the type of care the physician renders. Aftercare implies the physician is providing related treatment for the patient after a surgery or procedure. Follow-up, on the other hand, is surveillance of the patient to make sure all is going well.

What are aftercare codes?

Aftercare visit codes are assigned in situations in which the initial treatment of a disease has been performed but the patient requires continued care during the healing or recovery phase, or for the long-term consequences of the disease.

What is diagnosis code Z98 890?

ICD-10 code Z98. 890 for Other specified postprocedural states is a medical classification as listed by WHO under the range - Factors influencing health status and contact with health services .

What is the ICD-10 code for arthrodesis status?

Z98.1Z98. 1 Arthrodesis status - ICD-10-CM Diagnosis Codes.

What is the ICD-10 code for ASHD?

10 for Atherosclerotic heart disease of native coronary artery without angina pectoris is a medical classification as listed by WHO under the range - Diseases of the circulatory system .

What is the ICD-10 code for history of knee surgery?

Presence of artificial knee joint, bilateral The 2022 edition of ICD-10-CM Z96. 653 became effective on October 1, 2021. This is the American ICD-10-CM version of Z96.

What is the ICD-10 code for status post arthroscopy?

Arthroscopic surgical procedure converted to open procedure Z53. 33 is a billable/specific ICD-10-CM code that can be used to indicate a diagnosis for reimbursement purposes. The 2022 edition of ICD-10-CM Z53. 33 became effective on October 1, 2021.

What is ICD 10 code for knee replacement?

Presence of artificial knee joint, bilateral The 2022 edition of ICD-10-CM Z96. 653 became effective on October 1, 2021. This is the American ICD-10-CM version of Z96.

What is the diagnosis code for total knee replacement?

Total Knee ArthroplastyCodeDescription27486REVISION OF TOTAL KNEE ARTHROPLASTY, WITH OR WITHOUT ALLOGRAFT; 1 COMPONENT27487REVISION OF TOTAL KNEE ARTHROPLASTY, WITH OR WITHOUT ALLOGRAFT; FEMORAL AND ENTIRE TIBIAL COMPONENT2 more rows

What is meant by orthopedic surgery?

orthopaedic surgery in British English British or orthopedic surgery US (ˌɔːθəˈpiːdɪk ˈsɜːdʒərɪ ) noun. surgery. surgery concerned with disorders of the spine and joints and the repair of deformities of these parts.

What is ICD 10 code for left hip fracture?

ICD-10-CM S72. 002A is grouped within Diagnostic Related Group(s) (MS-DRG v39.0): 521 Hip replacement with principal diagnosis of hip fracture with mcc. 522 Hip replacement with principal diagnosis of hip fracture without mcc.

What is the code for aftercare after explantation of a joint?

Aftercare following explantation of a joint prosthesis is reported with a code from category Z47, denoting orthopedic aftercare. Aftercare following explantation of a joint prosthesis (Z47.3-) may be reported for a staged procedure or an encounter for evaluation of planned insertion of a new joint prosthesis following prior explantation of a joint prosthesis. In ICD-10-CM, aftercare for explantation of a joint prosthesis is specific to site.

What is the ICd 10 code for aftercare?

Aftercare codes are found in categories Z42-Z49 and Z51. Aftercare is one of the 16 types of Z-codes covered in the 2012 ICD-10-CM Official Guidelines and Reporting. Aftercare visit codes cover situations occurring when the initial treatment of a disease has been performed and the patient requires continued care during the healing or recovery phase, or care for the long-term consequences of the disease.

What is the aftercare code for a fracture?

Aftercare for injuries is reported with a V-code in ICD-9-CM. However, aftercare of injuries in ICD-10-CM is captured with the seventh character “D,” specifically denoting routine care following most injuries. For fractures, additional seventh characters for subsequent encounters apply, depending on whether the fracture is open or closed and whether the healing is routine or delayed, with nonunion or malunion.

What is the ICd 10 code for factors influencing health and contact with health services?

The codes for factors influencing health and contact with health services represent reasons for encounters. In ICD-10-CM, these codes are located in Chapter 21 and have the initial alpha character of “Z,” so codes in this chapter eventually may be referred to as “Z-codes” (just as the same supplementary codes in ICD-9-CM were referred to as “V-codes”). While code descriptions in Chapter 21, such as aftercare, may appear to denote descriptions of services or procedures, they are not procedure codes. These codes represent the reason for the encounter, service or visit, and the procedure must be reported with the appropriate procedure code.

What is the code for traumatic fracture?

Reason for encounter: Aftercare for traumatic fracture is reported with code S82.224D, Nondisplaced transverse fracture of shaft of right tibia, subsequent encounter for closed fracture with routine healing.

What is the code for antineoplastic radiation?

Codes for encounters for antineoplastic radiation, chemotherapy and immunotherapy (Z51.0, Z51.1-) are assigned if the sole reason for the encounter is antineoplastic therapy – even if the patient still has the neoplastic disease.

When the reason for an encounter is aftercare following a procedure or injury, should the 2012 ICD-10-CM?

When the reason for an encounter is aftercare following a procedure or injury, the 2012 ICD-10-CM Official Guidelines and Reporting should be consulted to ensure that the correct code is assigned. Codes for reporting most types of aftercare are found in Chapter 21. However, aftercare related to injuries is reported with codes from Chapter 19, using seventh-character extensions to identify the service as aftercare.

What does NEC mean in code?

NEC "Not elsewhere classifiable" - This abbreviation in the Alphabetic Index represents "other specified". When a specific code is not available for a condition, the Alphabetic Index directs the coder to the "other specified” code in the Tabular List.

What is hip replacement?

Hip replacement is surgery for people with severe hip damage. The most common cause of damage is osteoarthritis. Osteoarthritis causes pain, swelling, and reduced motion in your joints. It can interfere with your daily activities. If other treatments such as physical therapy, pain medicines, and exercise haven't helped, hip replacement surgery might be an option for you.

What is the NIH?

NIH: National Institute of Arthritis and Musculoskeletal and Skin Diseases

What is the ICd 10 code for joint replacement?

V54.81 is a legacy non-billable code used to specify a medical diagnosis of aftercare following joint replacement. This code was replaced on September 30, 2015 by its ICD-10 equivalent.

What is inclusion term?

Inclusion terms - List of terms is included under some codes. These terms are the conditions for which that code is to be used. The terms may be synonyms of the code title, or, in the case of "other specified" codes, the terms are a list of the various conditions assigned to that code. The inclusion terms are not necessarily exhaustive. Additional terms found only in the Alphabetic Index may also be assigned to a code.

What is a type 1 exclude note?

Type 1 Excludes Notes - A type 1 Excludes note is a pure excludes note. It means "NOT CODED HERE!" An Excludes1 note indicates that the code excluded should never be used at the same time as the code above the Excludes1 note. An Excludes1 is used when two conditions cannot occur together, such as a congenital form versus an acquired form of the same condition.

What does "see also" mean in the alphabet?

See Also - A "see also" instruction following a main term in the Alphabetic Index instructs that there is another main term that may also be referenced that may provide additional Alphabetic Index entries that may be useful. It is not necessary to follow the "see also" note when the original main term provides the necessary code.

What does NEC mean in code?

NEC "Not elsewhere classifiable" - This abbreviation in the Alphabetic Index represents "other specified". When a specific code is not available for a condition, the Alphabetic Index directs the coder to the "other specified” code in the Tabular List.

What is the ICd 10 code for a fractured lower arm?

V54.12 is a legacy non-billable code used to specify a medical diagnosis of aftercare for healing traumatic fracture of lower arm. This code was replaced on September 30, 2015 by its ICD-10 equivalent.

What is inclusion term?

Inclusion terms - List of terms is included under some codes. These terms are the conditions for which that code is to be used. The terms may be synonyms of the code title, or, in the case of "other specified" codes, the terms are a list of the various conditions assigned to that code. The inclusion terms are not necessarily exhaustive. Additional terms found only in the Alphabetic Index may also be assigned to a code.

What does "see also" mean in the alphabet?

See Also - A "see also" instruction following a main term in the Alphabetic Index instructs that there is another main term that may also be referenced that may provide additional Alphabetic Index entries that may be useful. It is not necessary to follow the "see also" note when the original main term provides the necessary code.

What is a type 1 exclude note?

Type 1 Excludes Notes - A type 1 Excludes note is a pure excludes note. It means "NOT CODED HERE!" An Excludes1 note indicates that the code excluded should never be used at the same time as the code above the Excludes1 note. An Excludes1 is used when two conditions cannot occur together, such as a congenital form versus an acquired form of the same condition.

What is a fracture in a bone called?

A fracture is a break, usually in a bone. If the broken bone punctures the skin , it is called an open or compound fracture. Fractures commonly happen because of car accidents, falls or sports injuries. Other causes are low bone density and osteoporosis, which cause weakening of the bones. Overuse can cause stress fractures, which are very small cracks in the bone.

What is a code also note?

Code also note - A "code also" note instructs that two codes may be required to fully describe a condition, but this note does not provide sequencing direction.